Rocker Rail Steps |
|
|
|
As the truck rose in height
it was increasingly difficult to climb into the bed in the back of the vehicle.
So I decided to add steps since the rocker rails don't stick out far enough. |
|
So I took off some paint at
the ends and also cleaned some tubes ready for primer. |
|
The step reaches away from the
vehicle the same distance as the fender flares. |
|
After fitting the tubes they
were welded on and painted with a primer - white, so they stick out :-) |
|
Here are the steps before getting
the finish. |
|
And here the painted step with
the slip-prove. |
|
|
|
|
|